VAG K+CAN Commander full 1.4 奥迪大众调表线/检测线 Description:
List of vehicles covered from function odometer change via OBDII:
Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to2007
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2004
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to2007!!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN) List of vehicles covered from function security access code/login reading via OBDII
Audi A2
Audi A3 (CAN) up to2007!!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2001
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)
*Current version 1.4 covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to 20077
Package includes:
- 1 x VAG Commander K+CAN 1.4
- 1 x Software CD
售后服务,买家必读
一、发货和收货须知
1.运费可以到付
2.您在收到货物时,请务必当着快递员签收,在签收前必须确认箱内的商品无损坏,无缺少,否则拒收,一旦有问题,我们才能帮您处理解决。您签收后则视为商品完好无缺,否则缺失和损坏情况我们也无法解决,敬请理解。
二、保修细节
1、在接到您的产品后,我们会将问题产品送到厂商特约维修中心检测与维修;
2、如果检测结果是无故障或者是人为因素造成的故障,我们会及时的通知您,并咨询您的处理意见。
三、符合以下情况可以接受退货和换货
1、客户在收到货物签收前,当面在快递送货员面前拆包检查,发现货物有缺失和损坏的。
2、经我们测试,产品确实不能与相关可以检测的车型通讯和开机的情况。非人为损坏。
换货流程:客人需在收到货之内的3个工作日之内联系我们相关换货问题,我们会在一到两个工作日内为您重新发货。否则只能作为维修处理。
四、以下情况下我们有权拒绝的退换货要求
1、退换货物不全或者外观受损
2、经我们测试,客人所提的质量问题不存在的情况。
3、客户由于自身原因不会使用设备,而认定产品有质量问题的
4、有的车型可以检测,有的车型不可以检测,就认定产品质量问题的
退货的来回费用由客户自己承担,客户朋友们也多理解一下我们,产品您返回以后我们无法再次销售。
博世BOSCH、电装、德尔福、西门子等厂家特约经销商