批发 4D CLONING TOOL

欢迎来到中国汽车诊断工具OBD专营店！

本店专营奔驰、宝马、大众、奥迪等品牌汽车诊断工具及配件销售，所有产品物美、价廉、质优，提供技术支持和维修服务！承接大量外贸定单，如需更多产品，请电话&微信：18512128227【微信同号】，QQ：18512128227【微信同号】，邮箱:18512128227【微信同号】@qq.com  

 Throughout the entire operation the device must be connected to the PC in the "CONNECTED TO PC " mode.

Duration of the entire operation varies from some tens of seconds to some minutes, according to the key to be copied and the power of the computer used.  

4D Cloning Tool

Notes:

1) Throughout the entire operation the device must be connected to the PC in the "CONNECTED TO PC " mode.
2) Duration of the entire operation varies from some tens of seconds to some minutes, according to the key to be copied and the power of the computer used. 

HOW TO Make a Copy of a Key with 4D Cloning Tool Program? 

1. If you plug 4D CLONING TOOL device in USB port first time operation system offer to install the driver of located device.
2. Choose the manual installation method with point of driver directory (it is 2nd method).
3. Point the directory to folder "FTDI / driver " from CD. If you have done everything correctly, then the operation system will confirm that the new device already installed and ready to work.
4. Detect the number of USB port in which you plug in the 4D CLONING TOOL device.
5. Click by right button>6. Choose "System property -> equipment->devices manager ".
7. Open "Ports (COM and LPT) ".The virtual COM port of device connection will located like "USB Serial Port ".The copy works for keys used>8. Make sure the device is>18512128227【微信同号】