J-Link JLINK V8 + KTAG ECU Programming Tool Repair Chip 芯片

J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator Plus KESS V2/KTAG CPU Repair Chip
 

J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulationThrough RDI interface and the integrated development environment for seamless connectivity, easy, convenient connectionsEasy to learn, is learning and developing ARM best and most practical development tools. Supported Operating Systems: Microsoft Windows 2000Microsoft Windows XPMicrosoft Windows XP x64Microsoft Windows 2003Microsoft Windows 2003 x64Microsoft Windows VistaMicrosoft Windows Vista x64 V8.0 is Improved Version of V7.0:
1. Improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug debug mode can be normal when debugging CORTEX-M3 core chips will not use SWD functionality, V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed!JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!

2. V8.0 using two-color LED can indicate more work status, V7.0>Other Hightlights of J-LINK V8:
1. J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;2. J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board);3. J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8`s SWD velocities slower than the V74. J-LinkV8 have three lights,>5. J-Link V8`s firmware update process is not DLL, and can not write the same as V7 Bootloader>18512128227【微信同号】