2014 New UPA USB Programmer V1.2 with Full Adaptors全适配器

Upa-usb 2014 is the full set with all adapters,The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It"s equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.

2014 New UPA USB Programmer V1.2 

带 全套适配器   新品   增加TMS/ NEC/ 912 适配器

Supported Language:  English> V2013                                    Software Version:  V1.2 Product Information: Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket. The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually.(Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector) Package Contains: 1x UPA programmer1x USB cable1 x Mainboard with 40pin DIL ZIF (600mil) socket and 14pin SOIC ZIF (150mil) socket Config Keys: (For Device Configuration) 1 x I2C & SPI Config Key1 x Microwire Config Key1 x Microwire Rotated Config Key1 x Microwire 93(C)S   8 pin Config Key1 x Microwire 93(C)S 14 pin Config Key1 x M35080 Config Key1 x SDA(E)2506 Config Key PLCC52 ISP Adapters: 1 x CR16MES & CR16MFS ISP Adapter1 x MC68HC05B ISP Adapter1 x MC68HC08AS20 ISP Adapter1 x MC68HC705B16 ISP Adapter1 x MC68HC11A8/E9 ISP Adapter1 x MC68HC05H12 ISP Adapter1 x MC68HC11EA9 ISP Adapter PLCC68 ISP Adapters: 1 x MC68HC11F1 ISP Adapter1 x MC68HC11KA2/4 & MC68HC11KS ISP Adapter1 x MC68HC11L6 ISP Adapter PLCC84 ISP Adapters: 1 x MC68HC11P2 & MC68HC11PH8 ISP Adapter1 x MC68HC11K ISP Adapter1 x DIL to 10pin Flat-ribbon header (For using IC clips or clamps)1 x Flat-ribbon cable 10pin EEproms Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat- ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.Motorola MCU"sPick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated,> 

Q:Does this UPA can do TMS chip ?A: Yes

博世BOSCH、电装、德尔福、西门子等厂家特约经销商